I just bought a 1983 Toyota Sunrader. Here's a picture:
The good: fiberglass is intact, no leaks, new vents, working water pump, radiant heater, new battery (had to replace the terminals, they were super ghetto rigged), all lights work, all "plumbing" (just tubes really) is good, it has a 1 ton dually 6 lug full floating rear axle, shower/toilet, fresh water tank, grey and black water tanks, working propane stove/oven. It's got some rust issues but a friend of mine is a welder and can fix it for me.
112k miles original/never rebuilt, 22R engine, just drove it 1k miles from Arkansas to Virginia.
Big update:
Lots of work done. New carb (weber 32/36), new harmonic balancer, new oil pump seal, new water pump, valves are all in factory spec, new camshaft seals, new valve cover gasket, entire engine has been gone over with propane looking for a phantom vacuum leak (it was just a tuning issue), timing is good, all emissions equipment removed except ancient charcoal canisters.
Compression/oil rings are totally worn out. Head needs to come off, crank might be damaged. Later updates to come.
The good: fiberglass is intact, no leaks, new vents, working water pump, radiant heater, new battery (had to replace the terminals, they were super ghetto rigged), all lights work, all "plumbing" (just tubes really) is good, it has a 1 ton dually 6 lug full floating rear axle, shower/toilet, fresh water tank, grey and black water tanks, working propane stove/oven. It's got some rust issues but a friend of mine is a welder and can fix it for me.
112k miles original/never rebuilt, 22R engine, just drove it 1k miles from Arkansas to Virginia.
Big update:
Lots of work done. New carb (weber 32/36), new harmonic balancer, new oil pump seal, new water pump, valves are all in factory spec, new camshaft seals, new valve cover gasket, entire engine has been gone over with propane looking for a phantom vacuum leak (it was just a tuning issue), timing is good, all emissions equipment removed except ancient charcoal canisters.
Compression/oil rings are totally worn out. Head needs to come off, crank might be damaged. Later updates to come.
Last edited: