Photos - Sailin' on | Squat the Planet

Photos Sailin' on

Durp

Well-known member
Joined
Feb 22, 2011
Messages
507
Reaction score
756
Location
VA for now
Here are a few pics I took under way. I am awful at not taking enough photos, as I am more concerned with keeping my wine glass full and the wind in my sails. :)

The boats!

The ramshackle little one was the double stuff Oreo, our learn to sail boat. I was clueless when I got it, and she taught me so much.

The blue PH boat is my current home, 1960 Rawson PH 30. We are slowly doing a full refit to kick it out in big blue. Hoping to take to the Pacific in a year or two if it works out. We were going to go this coming August, but I want to spend more time on tall ships learning celestial navigation, and we are flying to Israel to be bums abroad for a month.

The tall ship is the Lady Washington, and I was lucky enough to be gifted a 32 hour transit by one of my grampa salt friends. Life is good when you are a wharf rat :) I plan to become a tall ship sailor for part of the year to finance cruising.


13346389_10206547271949915_6762170116448664971_o.jpg
13323336_10206547271149895_8241968185706809774_o.jpg
14207807_10207167387932427_1067031329897188087_o.jpg
14107644_10207167387852425_3674044308083037844_o.jpg
14138211_10207167387372413_6911815146259933904_o.jpg
14114796_10207167387332412_1931265139240696182_o.jpg
14114771_10207167387292411_5880094612415069506_o.jpg
14188110_10207167354891601_6677898057869450241_o.jpg
14188406_10207167354851600_5681162907621819850_o.jpg
14125615_10207167354491591_623200540387468837_o.jpg
14196071_10207167354371588_7471764966083218429_o.jpg
14188319_10207167354331587_374331174411275209_o.jpg
14124302_10207167353531567_4899987708919720540_o.jpg
14102842_10207167353411564_1744007041434038492_o.jpg
14206062_10207167352771548_514973939334913021_o.jpg
14188101_10207167351971528_4465879911624211550_o.jpg
14114989_10207167351851525_3722341170880939745_o.jpg
14188662_10207167351811524_7747725206997779489_o.jpg
13344702_10206567960627119_102175474532449089_n.jpg
13317079_10206547281150145_1234469894433029984_o.jpg
13308444_10206547282350175_4133588332087147982_o.jpg
13301454_10206547281950165_4255240557655923698_o.jpg
13323473_10206547280910139_2241183088349544881_o.jpg
13323292_10206547280950140_2437076739451354757_o.jpg
13350404_10206547272589931_4233965356540951341_o.jpg
13308658_10206547272029917_3148976354445301635_o.jpg
 
Last edited:

Dmac

Well-known member
Joined
Dec 25, 2008
Messages
1,246
Reaction score
1,193
Location
Lincoln ne
Those tall ships are so f-ing cool! I wonder how many miles of rope ore used on the rigging? @JimH1991 I bet you have learned a lot about Knots and rope splicing. Do you have a favorite Knot?
 

Durp

Well-known member
Joined
Feb 22, 2011
Messages
507
Reaction score
756
Location
VA for now
I have learned quite a lot so far @Dmac, but I am still a novice, and have heaps to learn. I think sailing, line work, and all the trades involved are fairly simple to understand the basics to get you going, but a man can spend a lifetime trying to master them.

My favorite knot, that is tough, but it would be a modified double constrictor on the bight. It is an extremely strong knot that will hold anything together, with out having to mess with finding the ends. The way I tie it is easy to do one handed, and with a slight variation in how you pass the final bit makes it able to be untied quickly with a tug on the slack, non load bearing end. The load bearing end tightens the not as more force is applied, so it is also very useful for clamping as extreme pressures can be generated.

I am not really heading anywhere until my boat is fully refit. I cruise around between Olympia, WA up to an sometimes past Victoria, BC.

ATM, we do still spend a fair amount of time dockside, as I can chip away at repairs easier on land next to the boat. This will hopefully be my home for the next 10 years at least, so I want to put the forethought and effort to make her comfortable and safe far off shore.
 
  • Like
Reactions: Dmac

tacopirate

Well-known member
Joined
Feb 4, 2017
Messages
191
Reaction score
175
Location
28451
Nice pics man! Sailing is an art, much of it is easy to learn but I've never met anyone who would say they mastered it. I've been sailing a good while but hardly know anything compared to some folks. The Rawson looks very nice, it has an old look to it. How does she sail?
Hope you have fun in Israel!!
 

Durp

Well-known member
Joined
Feb 22, 2011
Messages
507
Reaction score
756
Location
VA for now
@tacopirate I totally agree with you on sailing being an art. The rawson sails well. The fastest I had it was 7.5 knots close hauled way over canvassed and pushin' it in a blow, 12 knots down wind with a following sea. The boat was just screaming, full sails up. I got caught out alone in the Strait of Juan de Fuca, and did not feel in danger. Even in 6ft of waves with the occasional breaker, she was well mannered considering. Ideally, I would not like to run that hard for fear of over stressing, or breaking things, but I wanted to see what she was capable of. I knew I was going to have to raise more sail after I got through the straight, and just felt it was worth picking up a few pots and pans rather then heave -to then dick with a sail change or reef. It takes a bit to get her moving, but when the wind picks up the decks and cockpit stay dry, and she is well mannered. She has a bit of weather helm. The sails are fine for around here, but too poor of shape for voyaging. Soon as tropical sun hits them I suspect the thread will just pack it in. rigging is from the 80's so I am due on a full refit.

I am building an auxiliary rudder based wind vane system for self steering, and plan to modify and enlarge my current rudder or build a new one entirely. I am leaning heavily to converting the boat to a cambered panel junk rig, unless someone can convince me that I could outfit my boat to a cutter for less. The junk rig is very appealing to me because I am paranoid about rigging failure, and trust my skills to install an un-stayed mast. The whole junk rig is DIY friendly, which means parts are available every where in the world. The ease of reefing, tacking, and gybing, are all appealing to me. I am trying to keep the costs to a minimum, but I do not wish to sacrifice safety. My boat is a cruiser, and thats what it was intended for, I doubt I will loose much performance since my sails are old any way. I guess I am just sort of weird, so I like weird boats.

If I did just decide to re-rig the standing rigging, I would consider this method - https://www.riggingdoctor.com/life-aboard/2015/8/10/synthetic-rigging-conversion

I like the idea of eliminating the hardware. I also really think the line rigging with dead eyes would by beyond sexy on my boat ;) Then I would have to build hardwood deadeyes, rope stopped blocks, and attach everything with lashings. lol... boats...
 
  • Like
Reactions: DrewSTNY

tacopirate

Well-known member
Joined
Feb 4, 2017
Messages
191
Reaction score
175
Location
28451
Jim, I'm surprised that boat could handle 7.5 knots but I've read they're well made. She has a nice looking keel on her. Lead, obviously? I'm sure you replaced the halyards, I can't imagine using anything that old for too long. How is the mast/boom? I've read that boats from that era were often manufactured with cheaper aluminum, though I don't know that to be a fact. Rope-stopped blocks and homemade deadeyes for the win, I think! I like that picture...
 

Durp

Well-known member
Joined
Feb 22, 2011
Messages
507
Reaction score
756
Location
VA for now
@tacopirate when the boat is on a 17 degree heel it has a 28 ft waterline. I probably had a following current too. That is just what the gps was putting out, so it might be a bit off. It is hard pressed and not quite comfortable at that rate. She is very comfortable around 6.2 knots regardless of conditions if reefed right, anything more it must be howling and over canvassed. The running rigging is only a couple years old, the standing rigging isn't good enough for offshore work, but is 5/16 in wire so it is way over sized and good enough till August. The boom is heavy by modern standards. It is sort of strange, has a strange goose neck, found a picture in the Hiscock's book of the same brand/ model unit, so I guess I have a roller reefing boom. The main is set up for slab reefing, I would need a flatter sail with no battens with soft wove fabric to try the roller. The mast is quite agricultural. It was an over sized aluminum pipe that had a taper cut out, clamped and welded. Not the most elegant, and the foot was painted last time it was re-rigged. I am not expecting corrosion issues when I drop it. Simple, robust, and over built like every thing else on the boat. I bet it is heavy. The sails are 20 or 15 years old by my guess. The keel is cement with iron ingots, 5000 lbs supposedly. Not quite sure because the boat weighed in at 14,000 lbs unloaded, it was weighed when the previous owner had it surveyed. Lead would be better, and is truly the only ehh point on the boat. Seems to be dry and in good shape. I have not have had any problems, it is an internal ballast, and the boat has a dry bilge. Mine is number hull 4, 1960. She is a total dog in light airs, unless you are fine to motor. It is almost not even worth pulling up the hook or casting off the lines unless there is force 3, and that won't even get us to hull speed. She needs that just to keep helm.... I think the solution is a monster nylon drifter.

As to getting a position as a helper on any sort of vessel, you just need to spend enough time at the docks and eventually someone will need an extra body. Make friends with boat folks.
 

About us

  • Squat the Planet is the world's largest social network for misfit travelers. Join our community of do-it-yourself nomads and learn how to explore the world by any means necessary.

    More Info

Help us pay the bills!

Total amount
$10.00
Goal
$100.00

Latest Library Uploads